DJI Osmo Pocket 4 Pro Filter-Set: CPL & ND verwenden

Quick answer

Attach the CPL or ND filter to your DJI Osmo Pocket 4 Pro to control light and reflections. Start with ND16 in bright sun, switch to ND64 or ND256 for extreme light, and use CPL to reduce glare from water or glass.

How to attach and use the filters

1. 1. Clean the lens: Use a microfiber cloth to remove dust and fingerprints from the Osmo Pocket 4 Pro lens. A dirty lens causes soft images and flare. Always clean before attaching any filter.
2. 2. Align the filter with the lens housing: Hold the filter by its edges and gently press it onto the lens mount until it clicks. Do not force it – if it doesn't align, rotate slightly. Misalignment can cause vignetting; check the filter sits flush.
3. 3. Choose your filter based on light: In bright sunlight, start with ND16. For overcast or indoor scenes, use no filter or CPL. Switch to ND64 or ND256 only when the scene is extremely bright (e.g., snow or beach). ND256 is very dark – test a short clip before filming.
4. 4. Adjust camera settings after attaching: Set your Osmo Pocket 4 Pro to manual exposure (M mode). Adjust shutter speed and ISO after attaching the filter to get proper exposure. Auto mode may overcompensate. Always re-check exposure after changing filters.
5. 5. Remove and store filters properly: When done, gently pull the filter straight off. Store each filter in its case to prevent scratches and dust. Never stack filters – use only one at a time.

Product facts

• DJI Osmo Pocket 4 Pro Filter-Set | CPL, ND16, ND64, ND256: Includes CPL, ND16, ND64, and ND256 filters for the DJI Osmo Pocket 4 Pro. You get four essential filters in one set, covering most lighting situations from bright sun to harsh reflections.