Softbox mit Klettverschluss für Vibe-Panels: Aufbau und Einsatz
By Rollei | Published: 2026-10-30
Category: How-to Guides
Learn how to set up and use the Rollei VIBE 900 Softbox with its velcro attachment on LED panels for soft, professional light shaping in video and photo work.
Quick answer
The Rollei VIBE 900 Softbox attaches directly to compatible LED panels via its built-in velcro strips, giving you quick setup and soft, diffused light without extra hardware.
Why use a softbox on an LED panel?
A bare LED panel produces harsh, direct light with strong shadows. Adding a softbox like the VIBE 900 spreads and softens the beam, reducing contrast and creating a more flattering look for interviews, product shots, or portraits.
The velcro attachment system is key: it lets you mount the softbox directly onto the panel without speed rings or brackets, saving time and weight in a run-and-gun setup.
Limitations to keep in mind
The velcro system is designed specifically for compatible Rollei Vibe panels. It may not fit third-party panels or non-velcro surfaces. Check your panel's mounting area before purchase.
Because the softbox attaches directly, you cannot tilt or rotate the light modifier independently of the panel. For fine adjustments, you'll need to move the entire light head.
Setup steps for the VIBE 900 Softbox
- 1. Prepare the panel and softbox: Ensure your LED panel is turned off and cool. Unfold the VIBE 900 Softbox and locate the velcro strips along its inner edge. Common mistake: Forgetting to check that the panel's mounting surface is clean and dry—dirt reduces velcro grip.
- 2. Align and attach the softbox: Center the softbox opening over the front of the panel. Press the velcro strips firmly onto the panel's corresponding velcro surface, working from one side to the other to avoid wrinkles. Common mistake: Attaching the softbox unevenly can cause light leaks or sagging. Check alignment before pressing down fully.
- 3. Shape and secure the fabric: Gently pull the outer fabric taut so the softbox forms its intended shape. Some models include an inner diffuser—if yours does, attach it before closing the outer layer. Common mistake: Skipping the inner diffuser if included—this reduces the softness of the light output.
- 4. Test the light output: Turn on the panel at a low power level. Check for even illumination across the softbox face. Adjust the panel's distance or power to achieve your desired softness. Common mistake: Setting the panel too close to the subject creates a hotspot in the center. Move it back for more even coverage.
Product facts
- Softbox I mit Klettverschluss I für Vibe-Panels: The VIBE 900 Softbox is designed for professional light shaping, combining modern design with functional features for beginners and pros. It gives you soft, diffused light directly on your LED panel, improving skin tones and reducing harsh shadows in video or stills.
Softbox I mit Klettverschluss I für Vibe-Panels
