Bowens Adapter for HS Freeze 2X & 1X: Mounting Light Modifiers
By Rollei | Published: 2026-10-31
Category: How-to Guides
Learn how to attach the Bowens adapter to your Rollei HS Freeze 2X or 1X studio flash and mount softboxes, reflectors, and other Bowens accessories safely. Step-by-step with checkpoints.
Quick answer
Attach the Bowens adapter to your HS Freeze 2X or 1X by aligning its mounting ring with the flash head, twisting until it locks, then securing your Bowens-mount modifier to the adapter. Always support the modifier while tightening and check the lock before letting go.
Why the adapter changes your lighting options
The HS Freeze 2X and 1X use a proprietary modifier mount. Adding a Bowens adapter opens up the huge range of Bowens-compatible softboxes, reflectors, and snoots, so you can shape light without buying brand-specific accessories.
The trade-off is an extra connection point: the adapter adds a small amount of depth and must be seated fully to avoid wobble. That is why the steps below emphasize alignment and lock checks.
When the adapter is not the right choice
If you only use small, lightweight modifiers that are already available for the HS Freeze mount, the adapter adds unnecessary bulk. Also, very large or heavy softboxes may exceed what the flash head and adapter can safely support; in that case use a separate light stand with a bracket instead of hanging the modifier directly on the flash.
Step-by-step: mounting the adapter and a modifier
- Power off and let the flash cool: Switch off the HS Freeze 2X or 1X and wait until the housing is cool to the touch before handling the mount. Never attach or remove modifiers while the flash is powered or hot.
- Align the adapter with the flash mount: Line up the adapter’s mounting ring with the flash head’s bayonet fitting, matching any alignment marks or pins. Forcing the adapter at an angle can damage the locking pins.
- Twist until it locks: Rotate the adapter clockwise until you feel or hear a firm click or stop. Do not overtighten. Give the adapter a gentle pull to confirm it is seated and locked.
- Attach the Bowens modifier: Mount your softbox, reflector, or other Bowens accessory onto the adapter’s front ring, supporting its weight with one hand while tightening any locking screw or collar. Always support the modifier until the locking mechanism is fully engaged.
- Check balance and clearance: Before letting go, verify the modifier sits squarely and does not put strain on the adapter or flash head. Adjust the angle of the flash rather than forcing the modifier. If the setup feels front-heavy, use a light stand with a bracket to carry the load.
- Test before the shoot: With the flash off, gently rock the modifier to confirm there is no play. Then power on and fire a few test flashes to ensure everything stays secure. Re-check the lock after the first few flashes, as vibration can loosen connections.
Product facts
- Bowens Adapter für HS Freeze 2X & 1X: Compatible with Rollei HS Freeze 2X and 1X flash units. You can use the same adapter on either flash, so one accessory covers both heads.
Bowens Adapter für HS Freeze 2X & 1X - Bowens Adapter für HS Freeze 2X & 1X: Enables use of Bowens-mount light modifiers such as softboxes and reflectors. This expands your creative options without replacing your existing Bowens gear.
